620 Configuring IPv6
Figure 10-12. DHCPv6 Interface Configuration - Server
3.
Modify the fields as needed.
4.
Click
Apply Changes
.
The DHCPv6 interface configuration is saved, and the device is updated.
Configuring a DHCPv6 Interface Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-10. DHCPv6 Interface Configuration Commands
CLI Command Description
ipv6 dhcp relay Configures an interface for DHCPv6 relay functionality.
ipv6 dhcp relay-agent-info-opt Configures a number to represent the DHCPv6 Relay Agent
Information Option.
ipv6 dhcp relay-agent-info-remote-id-
subopt
Configures a number to represent the DHCPv6 the “remote-id” sub-
option.
ipv6 dhcp server Configures DHCPv6 server functionality on an interface.
show ipv6 dhcp interface Displays DHCPv6 information for all relevant interfaces or a specified
interface.
To Next Page
Loading...
