674 Configuring Quality of Service
Service Type Criteria
Click to select one of the following three Match fields to use in matching packets to class criteria:
•
IP DSCP
— Matches the packet’s DSCP to the class criteria’s when selected. Either select the DSCP
type from the drop-down menu or enter a DSCP value to match. Valid range is 0-63.
•
Match Every
— Requires a packet to match every criterion when
Match Every
is checked.
Configuring Class Criteria with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 11-3. Class Configuration Commands
CLI Command Description
class Creates an instance of a class definition within the specified policy for
the purpose of defining treatment of the traffic class through
subsequent policy attribute statements.
To Next Page
Loading...
