GD32VF103 User Manual
109
7.4.4. TIMER AF remapping
Table 7.4. TIMER0 alternate function remapping
TIMER0_REMAP [1:0]
= “00” (no remap)
TIMER0_REMAP [1:0] =
“01” (partial remap)
TIMER0_REMAP [1:0] =
“11” (full remap)
(1)
1. For different packages and flash sizes please refer to the datasheet.
Table 7.5. TIMER1 alternate function remapping
TIMER1_REMAP
[1:0] = “00”
[1:0] = “01”
(partial remap)
TIMER1_REMAP
[1: 0] = “10”
TIMER1_REMAP
[1:0] = “11”
TIMER1_CH0/TIMER
1_ETI
(1)
1. For different packages and flash sizes please refer to the datasheet.
Table 7.6. TIMER2 alternate function remapping
TIMER2_REMAP [1:0] =
“00” (no remap)
TIMER2_REMAP [1:0] =
“10” (partial remap)
TIMER2_REMAP [1:0] =
“11” (full remap)
(1)
1. For different packages and flash sizes please refer to the datasheet.
Table 7.7. TIMER3 alternate function remapping
To Next Page
