Hioki 8835-01 - Period Trigger Function

165
────────────────────────────────────────────────────
7.12 Arbitrary Setting of Voltage Axis Magnification/ Compression and Display Range
────────────────────────────────────────────────────
Method 1
Move the flashing cursor to the respective
columns and select columns individually with
the
JOG control or the function keys. (Move the
column with the cursor keys.)
: Value up
: Value down
: Reset. The reset value is determined by the
voltage-axis range, zero position, and
magnification ratio.
: Enter the value using the numeric keys
(Method 2).
Method 2 (Using the numeric keys)
As opposed to method 1, selection is made for
each column individually using the numeric
keypad.
1. Move the flashing cursor to the item to set.
2. Select the numeric keypad using the function
key. The number key layout appears.
3. Enter the parameter.
The cursor can be moved along the columns
using the cursor keys. After the value is input
using the numeric keys, the cursor moves to
the next column.
4. Use the function keys to make the setting.
: Reset
: Enable the input value and escape from the
ten-key input screen.