Mobility traffic manager
Scenario 3: Centralized traffic on a controller with per-user traffic routing
9-30
This will automatically enable the 802.1X authentication option and set it to use the
local user accounts.
2. Either disable Wireless security filters or set it to Custom.
3. Select Save.
Network profiles
Define network profiles that map VLAN 30 and 40 to the Internet port on the controller.
1. Select Controller > Network > Network profiles.
2. Select Add New Profile.
3. Under Settings, set Name to Network 3.
4. Select VLAN, and under it, set ID to 30.
5. Select Save.
6. Select Add New Profile.
7. Under Settings, set Name to Network 4.
To Next Page
Loading...
