Mobility traffic manager
Scenario 4: Assigning home networks on a per-user basis
9-41
Network profiles
1. Select Controller > Network > Network profiles.
2. Select LAN port network.
3. Under Settings, change Name to Net1.
4. Select Save.
Controller 2 configuration
Mobility domain
1. Select Controller >> Management > Device discovery.
(For complete screenshot see Defining the mobility domain on page 9-9.)
Select Mobility controller discovery.
Clear This is the primary mobility controller.
Specify the IP address of the primary mobility controller. In this example:
192.168.10.1.
2. Select Save.
VSC
VSC configuration is the same as for controller 1.
To Next Page
Loading...
