Authentication services
Using an Active Directory server
11-14
Configuration parameters
General
Group name
Specify a name to identify the group. This name must match an existing Active Directory
Organizational Unit configured on the Active Directory Server.
Active
Enable this option to activate the group. The group cannot be used until it is active.
Access-controlled group
Determines whether the group is access-controlled or not.
Access-controlled groups can only be used to log in on VSCs that are access-
controlled.
Non access-controlled groups can only be used to log in on VSCs that are not access-
controlled.
VSC usage
Enable this option to restrict this group to one or more VSCs. If the selected VSCs are not
defined on an AP, users will not be able to log in on this account.
The Available VSCs list shows all defined VSCs that you can select from.
To move VSCs between the two lists:
Double-click the profile you want to move.
Or, select the profile you want to move and then select the left or right arrow.
Account profiles
Enable this option to set the attributes of this group using one or more account profiles.
The Available profiles list shows all defined profiles that you can select from. To add a
new profile, open the Controller >> Users > Account profiles page.
To move profiles between the two lists, double-click the profile you want to move, or
select the profile you want to move and then select the left or right arrow.
Effective attributes
This list shows all attributes that are active for this Active Directory group. Each time you
add an account profile for use by this group, all attributes configured in the profile are added
to the Effective attributes list.
Note Each profile that is applied to a group must have a unique set of attributes. The same
attribute cannot be present in two different account profiles.
To Next Page
Loading...
Need help?
General
