Working with RADIUS attributes
Colubris AV-Pair - Site attribute values
15-47
Placeholder
The following placeholder is only available when using a RADIUS server. If these values are
specified under Controller >> Public access > Attributes > Configured attributes, the
placeholder cannot be used.
Hosting pages on an external Web server
Use the following values to reference pages that reside on an external Web server.
Note The maximum length of any page URL is 512 characters. If this is exceeded (when using
placeholders for example), the URL is truncated. Therefore, it is recommended that you
specify the most-important placeholders first.
Note The controller maintains a separate copy of the URLs for external pages for each user. This
means it is possible to provide different pages for each user. See Displaying custom welcome
and goodbye pages on page 14-16.
Welcome page
welcome-url=URL_of_page[placeholder]
The user is authenticated, so the welcome page can be located on any URL reachable by the
user.
Login error page
login-err-url=URL_of_page[placeholder]
Access to the Web server hosting this page must be granted to all unauthenticated users. Do
this with an appropriate access list definition. (Users can see this page before they are logged
in.)
if the radius server denies user authentication, this is used instead of an error being presented
on the login page.
Goodbye page
goodbye-url=URL_of_page[placeholder]
Access to the Web server hosting this page must be granted to all unauthenticated users. Do
this with an appropriate access list definition. (Users see this page after they are logged out.)
Remote login page
Use this value to redirect users to a remote server to log in to the public access interface
instead of using the internal login page.
Placeholder Description
%a
Returns the IP address of the controller’s Internet port.
To Next Page
Loading...
Need help?
General
