5
BRIDGE MODE SETTING SCREEN
5-47
6. [Operating Mode] Menu
[Operating mode]
M Operating Mode
Select the operating mode.
• Some settings return to their default settings, when the operating mode is changed.
Operating mode …………… Select the operating mode. (Default: Bridge)
• Bridge
When communicating between 2 transceivers through the IP network,
select this mode.
Select the communication mode (Multicast mode or Unicast mode) when
the connected transceivers and external devices send an audio signal to
the IP network.
• Converter
See section 6 for the Converter mode.
An example of communicating in the Multicast mode
Radio C
Radio A
Radio A1 Radio B1
Radio C1
VE-PG3
(192.168.0.3)
VE-PG3
(192.168.0.2)
[TRX1]
[TRX2]
Radio B
[TRX1]
IP
Network
About the Multicast mode
The Multicast mode is selected as the default.
To Next Page
Loading...
