5
BRIDGE MODE SETTING SCREEN
5-21
5. [Router] Menu (continued)
M Connection Type
Select the WAN connection type.
Connection Type …………… Select the WAN connection type as specified by your ISP.
(Default: No Connection)
No Connection
Select this when the WAN port is not connected to the network.
The VE-PG3 is not connected to the network, even if the WAN port is
physically connected to a network port.
Note: PPPoE and IPv6 bridge communications also cannot be used.
DHCP Client
The WAN IP address is automatically obtained by a DHCP server.
Static IP
The WAN IP address is specified by your ISP.
PPPoE
The WAN IP address is specified by your ISP in the PPPoE method.
[Router]–[WAN]
To Next Page
Loading...
