6
CONVERTER MODE SETTING SCREEN
6-121
9. [Port Settings] Menu (continued)
M V/RoIP Control
Configure the details when a call from an IP phone is received by the bridge-connected device.
[Port Settings]–[Bridge 1–Bridge 4]
q Send Connect Success Tone to Telephone
Select “Tone 1” to “Tone 3” to notify that the connection to the calling IP phone
is succeed. (Default: Notice Tone 1)
w Send and Receive Change Notice to the Telephone
Select “Tone 1” to “Tone 3” to notify when the TX and RX are changed.
(Default: Not used)
e Notice Tone Volume ……… Select the tone level for above items. (Default: 0)
Range: "+6" to "–12" (dB)
To Next Page
Loading...
