Icom VE-PG3 - How to Restore the Configuration Using a USB Flash Drive

7
MAINTENANCE
7-12
(Continued on the next page.)
8. How to restore the configuration using a USB flash drive
q Select the USB device
w Rename
e Click
Click
You can clone the settings to other VE-PG3s.
It is convenient when you sequentially configure plural VE-PG3s.
Note: Before using a USB flash drive, see page 7-9.
Saving the settings file to a USB flash drive
Insert the USB flash drive securely to the PC.
1
Access the VE-PG3's setting screen.
2
Click [Management], then [Backup/Restore Settings].
• The [Backup/Restore Settings] screen appears.
3
Click <Backup>.
4
Select the root directory of the USB flash drive, and save the settings file as “savedata.sav.“
• Any of other file name is not acceptable.
5