Icom VE-PG3 - M Bridge Communication

6
CONVERTER MODE SETTING SCREEN
6-115
9. [Port Settings] Menu (continued)
M Bridge Communication
Configure the details for communication between bridge-connected device.
q Encryption ………………… Select "Enable” to encrypt the communication. (Default: Disable)
• When you select "Enable," enter the appropriate key to [Encryption Key].
w Talk-Back ………………… Select "Enable” to use the Talk-Back function. (Default: Enable)
• When you select "Enable," enter the appropriate valid period for the func-
tion.
Default Callee ID
e Call Type ………………… Select the type of call.
• Individual : Call only specified radio.
• Group : Call all radios that belong to the specified group.
• All : Call all radios.
r Destination Prefix ID …… Enter the prefix ID of the SelCall destination.
ID range: (Depending on the system mode)
t Destination ID …………… Enter the ID of the SelCall destination.
ID range: (Depending on the system mode)
y My Station Prefix ID ……… Enter the station prefix ID.
ID range: (Depending on the system mode)
u My Station ID …………… Enter the station ID. (Default: 1)
ID range: (Depending on the system mode)
[Port Settings]–[Bridge 1–Bridge 4]
K
r
K
t
K
y
K
u