6
CONVERTER MODE SETTING SCREEN
6-35
8. [Extension Connect] Menu (continued)
M Extension
Set the extension number and call destination number.
• The displayed items may differ, depending on the setting.
[Extension Connect]–[Extension Connect]
(Continued on the next page.)
q Extension Number ……… [Enter the extension number (2 to 7 digits) of the device connected to the port
set in [Port Type] (w).
w Port Type ………………… Select the type of port to connect the device. (Default: Transceiver 1 (TRX1))
• You cannot select the port which is already used.
e Outgoing Line Priority …… Select the line priority for outgoing call. (Default: IP LIne=> LINE)
r Radio System Group ……
Select the group to substitutionally receive the call to the group.
(Default: None)
• If a digital port is busy, then the received call is automatically transferred to
a vacant port.
t Outgoing Line (IP Line) … Select the IP line for outgoing call. (Default: None)
y Outgoing Line (LINE) …… Select the PSTN line for outgoing call. (Default: None)
Transceiver
EXT Input 1/2
Emergency Notice
Digital Transceiver
SIP Phone
Phone
Bridge
*Appears when “Enable” is selected in [DID Call].
*
*
*
*
!4
!5
To Next Page
Loading...
