Icom VE-PG3 - M Phone

6
CONVERTER MODE SETTING SCREEN
6-40
8. [Extension Connect] Menu (continued)
M PHONE
Configure the details for telephone.
• Some items may differ according to the setting.
[Extension Connect]–[PHONE]
q FAX Connection ………… Select “Enable” when connecting a FAX. (Default: Enable)
w RX Volume ……………… Select the received audio volume level. (Default: 0)
Range: “6” to “–12” (dB)
e TX Volume ……………… Select the transmit (microphone) audio volume level. (Default: 0)
Range: “6” to “–12” (dB)
r Blank Time between Digits Enter the delay to starts to call after the dialing. (Default: 5)
Range: “1” to “99” (seconds)
t Echo Canceller …………… Select “Enable” to turn ON the echo canceller. (Default: Enable)
y Echo Suppression ……… Select “Enable” to reduce the echo. (Default: Enable)
u Echo Suppression Level … Select the echo suppress level. (Default: –30)
Range: “0” to “–65” (dB)
i CNG Signal ……………… Select “Enable” to intentionally apply the noise signal to the received audio.
(Default: Enable)
o CNG Signal Level ……… Select the noise level to apply to the received audio. (Default: –55)
Range: “–30” to “–65” (dB)