6
CONVERTER MODE SETTING SCREEN
6-15
4. [Network] Menu (continued)
M QoS
Limits the bandwidth of the communication between WAN and LAN.
[Network]–[QoS]
q QoS ……………………… Select “Enable” to apply the QoS rule set in [QoS Rule]. (Default: Enable)
w Bandwidth Limit(Transmit) Enter the bandwidth for the packets which exceed the bandwidth limit in
0.1 Mbps step. (Default: 30.0)
Range: 0.0 to 100.0 (Mbps)
To Next Page
Loading...
