Icom VE-PG3 - M Callee ID to Phone Number

6
CONVERTER MODE SETTING SCREEN
6-62
9. [Transceiver Connection] Menu (continued)
M Callee ID to Phone Number
Configure the settings to convert the SelCall number into the IP phone number.
[Transceiver Connection]–
[Callee ID to Phone Number]
q Index ……………………… Enter the index assigned for the entry.
Setting range:”1” to”1000”
w Name ……………………… You can name the entry. (Up to 31 characters)
e Call Type ………………… Select the type of call. (Default: Individual)
• Individual: Call only specified radio.
• Group: Call all radios that belong to the specified group.
• All: Call all radios.
r Prefix ID …………………… Enter the prefix ID (0 to 30).
t Destination ID …………… Enter the destination ID.
ID range: (Depends on the system mode)
y Phone Number …………… Enter the number to dial, which follows the radio call number, to call a radio
from the IP phone. (Up to 31 characters)
u<Add> ……………………… Click to add the setting to the list.
• This is an example.