5
BRIDGE MODE SETTING SCREEN
5-13
4. [Network] Menu (continued)
M DHCP Server
Configure the DHCP Server function.
q DHCP Server …………… Select “Enable” to use the DHCP Server function. (Default: Disable)
w IP Pool Start Address …… Enter the IP pool start address. (Default: 192.168.0.10)
e Pool Size ………………… Enter the size of IP pool. (Default: 30)
Note: Up to 128 addresses can be automatically assigned by the DHCP serv-
er function. Another 32 addresses can be manually assigned.
r Subnet Mask ……………… Enter the subnet mask for the IP pool start address set in the [IP Pool Start
Address] item (w). (Default: 255.255.255.0)
t Lease Time ……………… Enter the lease time period. (Default: 72)
Range: 1–9999 (hours)
y Domain Name …………… Enter the network address domain name. (Up to 127 characters)
u Default Gateway ………… Enter the IP address of the connecting device, if the network part of the IP
address is different from that of set in [IP Pool Start Address] (w).
i DNS Proxy ……………… Select “Enable” to use the DNS Proxy function. (Default: Enable)
When “Enable” is selected, you don’t need to change the setting even when
the DNS server address has been changed. (Appropriate network settings in
[Network] and [Router] menu is necessary.)
When “Disable” is selected, the addresses entered in [Primary DNS Server] and
[Secondary DNS Server] are notified to the DHCP client, as the DNS server address.
o Primary DNS Server …… Enter the DNS server’s primary address.
!0 Secondary DNS Server … Enter the DNS server’s secondary address.
[Network]–[DHCP Server]
!3
!4
*
*
*Appears only when “Disable” is selected in [DNS Proxy].
To Next Page
Loading...
