Icom VE-PG3 - M Calling

6
CONVERTER MODE SETTING SCREEN
6-43
8. [Extension Connect] Menu (continued)
M Calling
Configure the line settings to call the designated callee.
[Extension Connect]–[Calling]
q Index ……………………… Assign the number (1 to 1000) for the entry.
w Routing Number ………… Enter the routing number up to 7 digits.
• You call the party by dialing the Routing Number + Phone Number.
The call is initiated through the line specified by the entered routing number.
(The routing number is not assumed as the part of actual phone number.)
e Phone Number …………… Enter the destination extension number up to 15 digits.
• You call the party by dialing the Phone Number.
The call is initiated through the specified line.
(The entered number is assumed as the whole Phone Number.)
r Priority …………………… Select the priority of the outgoing line.
IP Line -> LINE / LINE -> IP Line
The call initiated through the IP Line/LINE takes priority.
IP Line / LINE
The call is always initiated through the IP Line/LINE.
t Line Appointment ………… Select the prior line to call.
Extension Setting Priority
The call is initiated through the line selected on the [Extension Connect]
screen.
Appointment
The call is initiated through the line selected in the [Calling Line (Primary,
Secondary)] item.
Calling line
y Primary ……………………
Select the primary line, when “Appointment” is selected in [Line Appointment] t.
u Secondary ………………… Select the secondary line, when “Appointment” is selected in [Line Appointment] t.
i <Add> …………………… Click to add the setting to the list.