Icom VE-PG3 - M Tone Detection

6
CONVERTER MODE SETTING SCREEN
6-26
7. [V/RoIP] Menu (continued)
M Tone Detection
Configure the details for telephone.
q Dial Tone ………………… Set the tone frequencies and timing when dialing.
w Ring Back Tone ………… Set the tone frequencies and timing when the of callee telephone’s handset is
put on.
e Disconnect Tone ………… Set the tone frequencies and timing when the line is disconnected.
Items for each settings:
r Frequency1
Frequency2 ……………… Enter the frequencies for the tone signal.
t Timing …………………… Set the signal pattern by specifying the ON and OFF times.
[V/RoIP]–[LINE Settings]