Icom VE-PG3 - M Pppoe Bridge; M Ipv6 Bridge

5
BRIDGE MODE SETTING SCREEN
5-28
5. [Router] Menu (continued)
M PPPoE Bridge
Note: The WAN side's operating mode setting is necessary to use this function.
This function cannot be used when "No Connection" is selected in [Connection Type].
M IPv6 Bridge
PPPoE Bridge ……………… Select Enable to bridge the PPPoE frame between WAN and LAN.
(Default: Disable)
IPv6 Bridge ………………… Select Enable to bridge the IPv6 frame between WAN and LAN.
(Default: Disable)
[Router]–[Bridge]