Icom VE-PG3 - M Dynamic DNS Updates

5
BRIDGE MODE SETTING SCREEN
5-33
M Dynamic DNS Updates
Displays the update status of the dynamic DNS servers.
q Time ……………………… Displays the time when the VE-PG3 notified the dynamic DNS server of the
VE-PG3's global IP address.
w Status ……………………… Displays the update status.
Note: If an error message appears, check the setting following the message.
• When any of the message shown below appears, check the dynamic DNS
settings.
• [Failed to access the dynamic DNS server]
• [Failed to log in the dynamic DNS server]
• [An error returned from the dynamic DNS server]
• [Authentication error]
• [Script error], and so on.
e Host Address …………… Displays the host name that is registered to the dynamic DNS server.
r IP Address ………………… Displays the global IP address that is registered to the dynamic DNS server.
t Refresh …………………… Click to refresh the screen.
y Update the Server ……… Click to send the VE-PG3's WAN IP address to the dynamic DNS server.
5. [Router] Menu (continued)
[Router]–[Dynamic DNS]