Icom VE-PG3 - M Voice Reception Control from the EXT Device

6
CONVERTER MODE SETTING SCREEN
6-97
9. [Port Settings] Menu (continued)
M Voice Reception Control from the EXT Device
Configure the details for the audio input from [EXT1]/[EXT2] port.
q Attack Time ……………… Enter the TX attack time in 5 millisecond step. (Default: 1000)
Range: 5 to 500 milliseconds
The time is the delay before the VOX switch turns ON after an audio signal is
received through the network.
w Release Time …………… Select the RX delay time in 5 millisecond step. (Default: 200)
Range: 5 to 2000 milliseconds
The time is the delay the VOX switch to turns OFF after not audio signal is
received through the network.
e Voice Delay ……………… Set the audio signal buffer time to prevent intermittent audio in 5 millisecond
step. (Default: 5)
Range: 0 to 500 milliseconds
r Voice Threshold ………… Set the voice threshold level. (Default: 70)
Range: 0 to 100 %
The VOX function automatically switches between receive and transmit
according to this threshold level.
Lower values make the VOX function more sensitive to the audio signal.
[Port Settings]–[EXT Input 1 (EXT1)/EXT Input 2 (EXT2)]
*Appears only when “Voice Data Detection” is selected in [Valid Timing].