6
CONVERTER MODE SETTING SCREEN
6-41
• In this example, when the extension group number “201” received an incoming call, the call designated to “200”
is transferred to “300” after 10 seconds passed, then the call is transferred again to both “200” and “300”after 20
seconds.
8. [Extension Connect] Menu (continued)
M Extension Group Entry (New)
You can manage several extension numbers in the group (up to 26 groups).
You can also set whether the extension number (device) accepts the call or not.
If no response is returned in a specified time period, you can transfer the call to other extension for 2nd and 3rd
pick-up.
[Extension Connect]–[Extension Group]
q Extension Group Entry Name Enter the name up to 31 characters.
w Extension Group Entry Number Enter the group number (2 to 7 digits) for the group entry (q).
The call is received according to the setting, when dialing the set callee desti-
nation number.
• You cannot set the number which is already set as the extension number.
e Extension Number ……… Enter the extension number for the device when a call is received in the
group number.
r Startup Time ……………… Enter the time period before the call receive is recognized.
(Default: Not used)
Options: "Not used," "10 seconds" to "60 seconds"
To Next Page
Loading...
