6
CONVERTER MODE SETTING SCREEN
6-34
8. [Extension Connect] Menu
M Basic
Configure the details for extension number and callee destination.
• Some items may differ according to the setting.
[Extension Connect]–[Basic]
q Transfer Switch Back Time Enter the switch back time when transferring a call. (Default: 20, 30)
( Example on the default value; When there is no response from the transfer
destination telephone for 20 seconds, the call received telephone rings for
30 seconds.)
w Hold Music ……………… Select the hold music type. (Default: Hold Music 1)
To use “Custom Music 1” to “Custom Music 3”
• Enter the check mark in [load Custom Hold Music] item on the [USB]
screen.
• Insert the USB flash drive which contains the hold music file of appropriate
name.
See page 7-14 for details.
e Hold Music volume ……… Select the hold music volume level. (Default: 0 dB)
r Transfer from PHONE … … Select “Enable” to transfer the ongoing call. (Default: Disable)
• Disable
Push the hook switch momentary (Release it within one second.) to toggle
the holding and cancelling the hold.
• Enable
The call can be transferred by the following procedure.
q Push the hook switch momentary (Release it within one second.) to hold
the call.
w Dial the second calling number.
e When the party responds, tell about the transferred call, then on-hook the
handset.
r The call has been transferred.
To Next Page
Loading...
