6
CONVERTER MODE SETTING SCREEN
6-46
M Special Number
Set the special numbers.
q Call Pickup ……………… Enter the extension number to substitutively respond the call to other
extension. (Default: *81)
w Directed Call Pickup …… Enter the number to substitutively respond the call to other extension
specified by the input number + the extension number. (Default: *80)
e Group Pickup …………… Enter the callee destination number to substitutively receive the call which is
designated to other port belongs to the same group. (Default: **)
• Numbers (0–9) and symbols (#, *) up to 3 digits.
r OFF-hook Sending ……… Select the tone signal when starting to dial.
Hold down this key for a while, then push the number keys to call.
(Default: None)
t OFF-hook Replying ……… Select the tone signal to receive the call.
• When no tone signal is specified, the call is automatically received when
you are called. (Default: #)
y ON-hook ………………… Select the tone signal to end (disconnect) the call.
• Pushing this key disconnects the communication route. (Default: #)
u Immediate Calling ……… Set the DTMF code for immediately transmitting the code. (Default: None)
i Special System Number … Enter the special system number. (Default: *82, *90, *91, *93, *92, *83, *89)
8. [Extension Connect] Menu (continued)
[Extension Connect]–[Special Number]
To Next Page
Loading...
