Icom VE-PG3 - M Digital Transceiver Connection; M Digital Transceiver Model

6
CONVERTER MODE SETTING SCREEN
6-80
9. [Port Settings] Menu (continued)
M Digital Transceiver Connection
Configure the details for digital transceiver communication settings.
M Digital Transceiver Model
Select the system mode from Trunking, Conventional or dPMR Mode2, according to your system.
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
"NXDN Trunking"
"NXDN Conventional"
q Repeater Address ……… Enter the UC-FR5000’s IP address.
"NXDN Trunking"
w Repeater Port Number … Enter the Receive Port number which is set in the UC-FR5000.
"NXDN Trunking"
eLocal Port Number ……… Enter the Dest Port number which is set in the UC-FR5000.
"dPMR Mode2"
!7
!8
!9
@0
@1