6
CONVERTER MODE SETTING SCREEN
6-81
r Connect Key ……………… Enter the Key Code which is set in the UC-FR5000.
"NXDN Trunking"
t Area Bit …………………… Turn the Area Bit ON or OFF. (Default: OFF)
"NXDN Trunking"
y Integrator Code ………… Displays the Integrator Code which is set in the UC-FR5000.
"NXDN Trunking"
u System Code …………… Displays the System Code which is set in the UC-FR5000.
Unit
i Prefix ID/Unit ID ………… Enter the Prefix ID (for NXDN Trunking) and Unit ID which are set in the
UC-FR5000. (Default: 1 (for both))
"NXDN Trunking"
"NXDN Conventional"
9. [Port Settings] Menu
M Digital Transceiver Connection (continued)
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
"dPMR Mode2"
!7
!8
!9
@0
@1
To Next Page
Loading...
