Icom VE-PG3 - M Voice Reception Control from the Transceiver

5
BRIDGE MODE SETTING SCREEN
5-75
Audio Detection Methods from the Transceiver: VOX
Audio Detection Methods from the Transceiver: SQL
Audio Detection Methods from the Transceiver: Always Receive
8. [Port Settings] Menu (continued)
M Voice Reception Control from the Transceiver
The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the VE-PG3 receives an audio signal through the network.
q Attack Time ……………… Enter the RX delay time in 5 milliseconds step. (Default: 50)
Range: 5 to 500 milliseconds
It is the delay time period before the VE-PG3 to output the audio signal to the port.
w Release Time …………… Select the RX delay time in 5 milliseconds step. (Default: 200)
Range: 5 to 2000 milliseconds
The delay time for the VE-PG3 to output the control signal to the network
which informs that the audio signal is no longer received.
e Voice Delay ……………… Set the audio signal buffer time to prevent intermittent audio in 5 milliseconds
step. (Default: 5)
Range: 0 to 500 milliseconds
r Voice Threshold ………… Set the voice threshold level. (Default: 40)
Range: 0 to 100 %
The audio signal is output to the network according to this threshold level.
t Ignore Time ……………… Set the amount of time to ignore the received audio signal.
(Default: 300)
Range: 0 to 2000 (milliseconds)
The VE-PG3 ignores the audio signal received within the Ignore Time.
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Audio Detection Methods from the Transceiver: SQL