Icom VE-PG3 - M Usb

5
BRIDGE MODE SETTING SCREEN
5-116
10. [Management] Menu (continued)
M USB
Select the option. to use USB flash device.
[Management]–[USB]
q USB Flash Drive …………
Select "Enable" if you use the Automatic firmware update function or
Automatic Setting Load function. (Default: Enable)
• See the “Maintenance” section for details.
w USB Access Permission … …
Select the access permit option.
(Default:
Firmware Update
Backup/Restore Configuration
Load Custom Hold Music)
• Firmware Update
Enter the check mark to enable the firmware update using a USB memory.
• Backup/Restore Configuration
Enter the check mark to enable the Backup/Restore settings using a USB
memory.
• Load Custom Hold Music
Enter the check mark to automatically load a hold music audio file (.wav)
from the inserted USB flash device.
Note: The maximum duration of audio file is a minute.