Icom VE-PG3 - M Bridge Communication

5
BRIDGE MODE SETTING SCREEN
5-71
8. [Port Settings] Menu (continued)
M Bridge Communication
Set the Bridge connection details for the [TRX1]/[TRX2] port.
q Encryption ………………… Select "Enable" to encrypt the communication. (Default: Disable)
• When you select "Enable," enter the appropriate key to [Encryption Key].
Note: Optional CT-24 is necessary for encryption by the AMBE+2 codec.
w Talk-Back ………………… Select “Enable” to enable the Talk-Back. (Default: Enable, 5 (seconds))
The Talk-Back function automatically selects the received caller to reply to
the received call, while the Talk-Back Time remains.
• When you select "Enable," select the Talk-Back Time between 1 and 10
(seconds).
Default Callee ID
e Default Callee ID ………… Select “Enable” to add the destination ID to the transmit signal.
(Default: Disable)
r Call Type ………………… Select the type of call.
• Individual: Call only specified radio.
• Group: Call all radios that belong to the specified group.
• All: Call all radios.
t Destination Prefix ID …… Enter the prefix ID of the SelCall destination.
ID range: (Depending on the system mode)
y Destination ID …………… Enter the ID of the SelCall destination.
ID range: (Depending on the system mode)
u My Station Prefix ID ……… Enter the station prefix ID.
ID range: (Depending on the system mode)
i My Station ID …………… Enter the station ID. (Default: 1)
ID range: (Depending on the system mode)
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]