6
CONVERTER MODE SETTING SCREEN
6-104
9. [Port Settings] Menu (continued)
M EXT Voice Terminal (Output)
Configure the audio output details for [EXT1]/[EXT2] port.
q Reference Level ………… Select the output level of A1/A2 terminal (Audio output). (Default: –20dBs)
w Output Analog Gain ……… Set the analog signal input (A1/A2 terminal (Audio output)) gain. (Default: 0)
Range: "+15" to "–30"
e Output Digital Gain ……… Set the digital signal input (A1/A2 terminal (Audio output)) gain. (Default: 0)
Range: "+6" to "–12"
r Response Waiting Time … Select the delay time before the received audio is output. (Default: 1.5 sec.)
This delay time is set according to your sound device specification.
• Select “Disable" to output the audio right after the signal is received.
[Port Settings]–[EXT Output 1 (EXT1)/
EXT Output 2 (EXT2)]
EXT I/O (1/2)
To Next Page
Loading...
