Icom VE-PG3 - Page 291

6
CONVERTER MODE SETTING SCREEN
6-105
9. [Port Settings] Menu
[Port Settings]–[EXT Output 1 (EXT1)/
EXT Output 2 (EXT2)]
t Fade-out ………………… Set the time period until the audio signal is muted. (Default: 1.5 sec.)
The Auto Fader function is available on following settings.
• Set “EXT I/O port” to “Separate mode.” (P6-47)
• Set “Input connection port” to “EXT Output.” (external input and output
ports are directory connected)
•
Set “Priority level setting” to “Priority calling” or “High priority calling.” (P6-140 )
y Fade-in …………………… Set the time period until the mute is cancelled. (Default: 1.5 sec.)
The Auto Fader function is available on following settings:
• Set “EXT I/O port” to “Separate mode.” (P6-47)
• Set “Input connection port” to “EXT Output.” (external input and output
ports are directory connected)
• Set “Priority level setting” to “Priority calling” or “High priority calling.” (P6-140)
u Restoration Waiting Time Select the delay time the audio level gradually returns.
(Default: 1.5 sec.)
M EXT Voice Terminal (Output) (continued)
EXT I/O (1/2)