Icom VE-PG3 - M Backup Settings; M Restore Settings

5
BRIDGE MODE SETTING SCREEN
5-118
10. [Management] Menu (continued)
M Backup Settings
Click to save the settings to the PC, or USB flash device which is connected to the PC.
M Restore Settings
Load the VE-PG3’s settings file.
[Management]–[Backup/Restore Settings]
q Load Settings from File …
Click <Browse...> to select the firmware file.
w Restore ………………………
Click <Update> to overwrite the selected firmware to the VE-PG3.
• The VE-PG3 automatically reboots.