7
MAINTENANCE
7-8
NOTE:
NEVER turn OFF the VE-PG3's power while updating. It will cause data corruption, or damage the USB flash drive.
If you cannot access the VE-PG3 setting screen after the updating. change the PC IP address according to your net-
work environment.
Click <Browse...> to select the firmware file (Extension: dat), and then click [Update].
• The “Updating Firmware” screen appears.
• When the updating is complete, the [TOP] screen appears.
Updating the firmware on the setting screen (Manual updating)
We recommend that you save the current setting in the PC, before updating the firmware.
Note: Some settings may be returned to their default after the firmware update. Check Icom website for details.
• Restricting to access the setting screen is recommended.
Using the Firmware Update function (Automatic updating)
When [PWR/MSG] lights orange, a firmware update is ready.
See the “Precautions” leaflet for the details.
• To use this function, an internet connection, DNS and default gateway settings are necessary.
• We recommend to save the setting file as the backup.
6. How to update the firmware (continued)
Download a new firmware (extension: “dat”) from Icom web site.
1
Click the [Management] menu, then [Firmware Update].
The [Firmware Update] screen aeaprs.
2
3
q Click
w Click
The selected location is displayed.
To Next Page
Loading...
