6
CONVERTER MODE SETTING SCREEN
6-91
9. [Port Settings] Menu (continued)
M V/RoIP Control
Set the details for receiving a call on the radio connected to [D-TRX1]/[D-TRX2] port.
q Send Connect Success Tone to Telephone
Select “Tone 1” to “Tone 3” to notify that the connection to the calling IP
phone is succeeded. (Default: Notice Tone 1)
w Send and Receive Change Notice to the Telephone
Select “Tone 1” to “Tone 3” to notify when the TX and RX are changed.
(Default: Not used)
e Notice Tone Volume ……… Select the tone level for above items. (Default: 0)
Range: “+6” to “–12” (dB)
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
To Next Page
Loading...
