Icom VE-PG3 - Operation

2
BRIDGE MODE APPLICATION
2-14
4. Operating in the NXDN Conventional mode (continued)
4. Operation
When pushing [PTT] on radio B1, the communication route is connected to radio A, to communicate with radio A1
or A2.
【Calling radio A1 from radio B1]
q
Radio B1’s operator: Select the radio A1(A2)’s ID (8), and then hold down [PTT] for 1 second.
• The communication route is connected.
w
Radio A1’s operator: Holding down [PTT], speak into the microphone to respond radio B1.
e
Radio A1’s operator: Release [PTT] to return to receive.
• In this setting, radio A1 cannot directly call radio B1. radio A1 can call radio B1 after radio B1 called radio A1,
using the Talk-back function.
• All radios communicate with radio A must be set as same as other radios in the area.
• In this example, radio A cannot call radios except radio A1 and A2.
P
0
P
1
P
2
P
3
P
4
P
0
P
1
P
2
P
3
P
4
Radio B1
Radio B2
VE-PG3
(192.168.0.2)
[D-TRX1] [D-TRX2]
[LAN]
[TRX1]
ID 1 ID 2
Radio C1 Radio C2
ID 3 ID 4
CT-24
[USB]
HUB
IC-FR5000
(192.168.0.3)
IC-FR5000
(192.168.0.4)
Repeater C
Repeater B
Radio A
Radio A1
Radio A2
An example of digital transceiver communication in the Conventional mode
IP
Network
Port No.:
21504
Port No.:
21506
ID: 8
Port No.:
21500
Destination
port No.
21502