Icom VE-PG3 - M DID Special Number; M Save or Write the Assignment Number Setting

6
CONVERTER MODE SETTING SCREEN
6-57
M DID Special Number
The DID Special Number is used to call the target transceiver or group.
M Save or Write the Assignment Number Setting
The DID Special Number is used to call the target transceiver or group.
You can make a call to the target transceiver or group by entering [DID Special Number] and [Individual ID] or [DID
Special Number] and [Group ID].
*Delimiter is a character to separate between a Prefix ID and a Unit ID to make a call to a digital transceiver.
*Enter a special number of up to 4 digits. Usable characters are: 0-9, #, *, A, B, C and D.
*“#” can be used for only the first digit.
*“#” cannot be used for [Delimiter].
9. Assignment Number
[Transceiver Connection]–
[Assignment Number]
q Load Settings from File
…………………………… You can reload the saved [Assignment Number] file (Extension: csv) and
write it to the VE-PG3.
Click <Browse...>, and select the [Assignment Number] file.
Verify that the selected file is displayed, and then click <Write>.
• The contents of the file are loaded to [List of Assignment Number Entries].
w Save to File ……………… Click <Save> to save the [List of Assignment Number Entries] table in the
PC, as the [Assignment Number] file (Extension: csv).
• You can edit the saved file in a spreadsheet.
• You can save or write an [Assignment Number] file to the VE-PG3.