6
CONVERTER MODE SETTING SCREEN
6-83
9. [Port Settings] Menu
M Digital Transceiver Connection (continued)
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
"NXDN Conventional"
!2 TCP Port Number ……… Enter the TCP port number which is set in the UC-FR5000 (Connection Port).
(Default: 41200)
"NXDN Conventional"
!3 UDP Port Number ……… Enter the UDP port number which is set in the UC-FR5000 (Data Port).
(Default: 41220)
"NXDN Conventional"
!4 Packet Encryption ……… Select “Enable” to encrypt the data packet. (Default: Disable)
• When you select "Enable," enter the appropriate key to [Key].
RAN
"NXDN Conventional"
!5 RX RAN …………………… Enter the RAN (Radio Access Number) for receiving. (Default: 1)
"NXDN Trunking"
"NXDN Conventional"
"dPMR Mode2"
!7
!8
!9
@0
@1
To Next Page
Loading...
