3
CONVERTER MODE APPLICATION
3-16
About the emergency announcement
• The emergency announcement has a higher priority than other calls, and can be received by all devices in the
system.
• The emergency announcement can be made according to the following conditions.
The destination of the external input port is set as "Emergency," and event’s timing condition is satisfied.
The call is sent to the extension number that is assigned as the emergency notice.
Emergency announcement destination
• The emergency announcement is output from the port selected on the [Expansion] screen in the [Emergency No-
tice] menu.
• The emergency announcement interrupts any ongoing communication.
• While the emergency notice is ongoing, any the release timer is disabled.
• The emergency notice is output as a broadcast. No response can be made.
• No emergency notice is allowed until the prior one ends.
4. Making an emergency announcement (continued)
To Next Page
Loading...
