Intel 6 SERIES CHIPSET - DATASHEET 01-2011 - Page 460

LPC Interface Bridge Registers (D31:F0)
460 Datasheet
13.1.22 LPC_EN—LPC I/F Enables Register (LPC I/F—D31:F0)
Offset Address: 82h – 83h Attribute: R/W
Default Value: 0000h Size: 16 bit
Power Well: Core
Bit Description
15:14 Reserved
13
CNF2_LPC_EN — R/W. Microcontroller Enable # 2.
0 = Disable.
1 = Enables the decoding of the I/O locations 4Eh and 4Fh to the LPC interface. This
range is used for a microcontroller.
12
CNF1_LPC_EN — R/W. Super I/O Enable.
0 = Disable.
1 = Enables the decoding of the I/O locations 2Eh and 2Fh to the LPC interface. This
range is used for Super I/O devices.
11
MC_LPC_EN — R/W. Microcontroller Enable # 1.
0 = Disable.
1 = Enables the decoding of the I/O locations 62h and 66h to the LPC interface. This
range is used for a microcontroller.
10
KBC_LPC_EN — R/W. Keyboard Enable.
0 = Disable.
1 = Enables the decoding of the I/O locations 60h and 64h to the LPC interface. This
range is used for a microcontroller.
9
GAMEH_LPC_EN — R/W. High Gameport Enable
0 = Disable.
1 = Enables the decoding of the I/O locations 208h to 20Fh to the LPC interface. This
range is used for a gameport.
8
GAMEL_LPC_EN — R/W. Low Gameport Enable
0 = Disable.
1 = Enables the decoding of the I/O locations 200h to 207h to the LPC interface. This
range is used for a gameport.
7:4 Reserved
3
FDD_LPC_EN — R/W. Floppy Drive Enable
0 = Disable.
1 = Enables the decoding of the FDD range to the LPC interface. This range is selected
in the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 12).
2
LPT_LPC_EN — R/W. Parallel Port Enable
0 = Disable.
1 = Enables the decoding of the LPTrange to the LPC interface. This range is selected in
the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 9:8).
1
COMB_LPC_EN — R/W. Com Port B Enable
0 = Disable.
1 = Enables the decoding of the COMB range to the LPC interface. This range is
selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 6:4).
0
COMA_LPC_EN — R/W. Com Port A Enable
0 = Disable.
1 = Enables the decoding of the COMA range to the LPC interface. This range is
selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 3:2).