Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
of a link aggregation
side of a link aggregation
used to connect to other devices
the local switch
specified time interval, or an sFlow data source instance that takes
ports
Displays statistics for LACP protocol messages
Displays configuration settings and operational state for the local side
Displays configuration settings and operational state for the remote
Configures connection settings
Displays port connection status
Shows the active members in a trunk
Shows Interface, Etherlike, and RMON port statistics
Shows Interface, Etherlike, and RMON port statistics
Sets the load-distribution method among ports in aggregated links
Shows statistical history for specified interfaces
Adjusts the power provided to ports based on the length of the cable
Sets the source and target ports for mirroring
Shows the configured mirror sessions
Mirrors traffic from remote switches for analysis at a destination port on
Configures flow sampling for receiver ports and instances
Creates an sFlow receiver on the switch
Enable an sFlow polling data source that polls periodically based on a
samples periodically based on the number of packets processed
Enables traffic segmentation globally
Configures the uplink and down-link ports for a segmented group of
Displays configured VLAN groups
Configures group name and administrative status
Specifies VLAN attributes per VLAN
Specifies VLAN attributes per interface
Edit Member by Interface Range
Specifies VLAN attributes per interface range
To Next Page
Loading...
