Matrix ETERNITY NE System Manual 215
MATRIX VARTA AMP100
MATRIX VARTA AMP100 is a proprietary SIP (Session Initiation Protocol) based UC Client Application running on
iPhones, delivering full-array of Matrix SARVAM UCS features to the user on-the-go along with an added
advantage of UC features. Through tight integration with the enterprise mobility features of the SARVAM UCS,
VARTA AMP100 provides advanced call capabilities including Conferencing, Corporate Directory Access (Global
Directory), Call Logs and Conversation Recording with one-touch access. Other than these, you can take the
advantage of using premium features like Video Calling, IM, IM to SMS, Presence notification/subscription and
corporate Voicemail access to enhance your overall mobile experience.
Mobile workers can use any Wi-Fi or cellular data networks to stay connected with business communications while
working from office, home or travelling to any location. An innovative and easy to understand user interface delivers
all productivity features at fingertips that enhances speed of communication and collaboration with office users and
customers.
For detailed product information and operation instructions, refer to the MATRIX VARTA AMP100 User Guide.
Configuring Mobile UC Clients using Jeeves
To be able to register and use the Mobile Handsets as Matrix SPARSH Mobile Softphone Clients, you must
configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• Matrix Extended Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended Phones/Soft Clients at three different locations as a single SIP Extension.
You can connect the same or different types of Extended Phones/Soft Clients —SPARSH VP248, SPARSH VP310,
SPARSH VP510, SPARSH VP330, Matrix Extended SPARSH VP710, Matrix VARTA UC Clients or MATRIX VARTA
WIN200 Desktop UC Client — at each location. In this case we assume that Matrix SPARSH Mobile Softphone
Clients are registered at Location 1, 2 and 3.
If you want to use more than one Matrix VARTA UC Clients as SIP Extensions, configure their settings as Location
1, Location 2 and Location 3.
If you want to use the IM functionality in the MATRIX VARTA ADR100/AMP100, you must configure it at
Location-1 only.
If you have connected SPARSH VP248 refer to “Configuring Matrix SPARSH VP248”.
If you have connected SPARSH VP310 at any of the locations, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have connected SPARSH VP330 refer to “Configuring Matrix SPARSH VP330”.
If you have connected Extended SPARSH VP710 at any of the locations, refer to “Configuring Matrix Extended
SPARSH VP710”.
If you have registered MATRIX VARTA WIN200 UC Client in any of the locations, refer to “Configuring MATRIX
VARTA WIN200 UC Client”.
To Next Page
Loading...
