Matrix Telecom ETERNITY NE - Page 257

Matrix ETERNITY NE System Manual 247
• Configure the settings in the third party DHCP Server. For instructions, see “Using any third party DHCP
Server in your LAN”.
• Configure the SIP Extension Settings in SARVAM UCS. For details, see “SIP Extensions”.
• Configure the device specific settings applicable to Htek at Location1on the SIP Extensions page. To do
so,
• Click SIP Extension Settings.
• Click Location 1 and configure the following parameters.
Parameter Description/Action to be Taken Applicable Open SIP Phone Variant
Enable Device Select the Enable Device check box. Htek 802 IP Phone
Location Name
Configure the Location Name to identify the Open
SIP Phone. The Location Name can be a maximum
of 18 characters. Default: Blank.
Htek 802 IP Phone
Device Type Select Device Type as Htek 802. Htek 802 IP Phone
MAC Address
Enter the MAC Address of the Htek 802 phone to be
connected at this location. Default: Blank.
SARVAM UCS validates the phone on the basis of
the MAC Address, and provides configuration on
validation.
Htek 802 IP Phone
Authenticate
HTTP
Provisioning
request
Select the Authenticate HTTP Provisioning request
check box to authenticate HTTP request for security
reason. Default: Disabled.
If you are using the Open SIP Phone from the Public
IP Address, we recommend you to enable this option.
SARVAM UCS validates the Open SIP Phone on the
basis of the SIP ID and HTTP Authentication
Password and provides configuration on validation.
Make sure, you have configured SIP ID as HTTP
User Name and HTTP Authentication Password as
HTTP Password in the Open SIP Phone.
Htek 802 IP Phone
Registrar Server
Address
Select the appropriate Registrar Server Address
according to your installation scenario
a
to register the
Open SIP Phone with the SIP Registrar of SARVAM
UCS. Default: Use Ethernet IP Address.
Htek 802 IP Phone
Admin
Password
Configure the Admin Password
b
of the Open SIP
Phone. It can be a maximum of up to 16 characters.
Default: admin
Htek 802 IP Phone
Assign Voice
Mail Key
Enable this check box to assign the first
programmable key of the phone as Voice Mail.
Htek 802 IP Phone