Matrix ETERNITY NE System Manual 249
• Configure the SIP Extension General Parameters in SARVAM UCS. For details, see “Configuring SIP
Extension General Parameters” in “SIP Extensions”.
55
• Configure the device specific settings applicable to your Matrix SPARSH VP110 at Location1on the SIP
Extensions page. To do so,
• Click SIP Extensions.
• Click Device Settings - Location1 to expand and configure the following parameters.
55. Some of the parameters may not be applicable depending on the Open SIP Phone you have connected. Please refer the specific
Open SIP Phone manufacturer’s documentation for more details.
Parameter Description/Action to be Taken
Applicable Open SIP Phone
Variant
Enable Device
Select the Enable Device check box. Default:
Disabled.
Matrix SPARSH VP110
Location
Name
Configure the Location Name to identify the
Open SIP Phone. The Location Name can be a
maximum of 18 characters. Default: Blank.
Matrix SPARSH VP110
Device Type
Select Device Type as MATRIX SPARSH
VP110 and click Submit to save.
Matrix SPARSH VP110
MAC Address
Enter the MAC Address of the SPARSH VP110
phone to be connected at this location. Default:
Blank.
SARVAM UCS validates the phone on the
basis of the MAC Address, and provides
configuration on validation.
Matrix SPARSH VP110
Authenticate
HTTP
Provisioning
request
Select the Authenticate HTTP Provisioning
request check box to authenticate HTTP
request for security reason. Default: Disabled.
If you are using the Open SIP Phone from the
Public IP Address, we recommend you to
enable this option.
SARVAM UCS validates the Open SIP Phone
on the basis of the SIP ID and HTTP
Authentication Password and provides
configuration on validation.
Make sure, you have configured SIP ID as
HTTP User Name and HTTP Authentication
Password as HTTP Password in the Open SIP
Phone.
Matrix SPARSH VP110
To Next Page
Loading...
