Olympus BondMaster 600 - Changing Spectrum Alarm Parameters in PC Swept Mode

DMTA-10045-01EN, Rev. E, August 2016
Chapter 5 92
•CURSOR
•GRID
•SCAN TIME
For parameter adjustment details, see “PC RF Mode — DISP/DOTS Menu” on
page 84. Parameter descriptions are based on the presumption that the
BondMaster 600 is set to MIA mode and the DISP/DOTS menu key ( ) has been
pressed.
5.3.8 RESON Mode — DISP/DOTS Menu
In RESON (resonance) mode, the following parameters can be adjusted on the
DISP/DOTS (display and dots) menu:
•RUN
• POSITION
• H POS (horizontal position)
• V POS (vertical position)
• STORE NEXT
•RE‑WRITE DOT
• ERASE DOT
• ERASE ALL
•SET REF
• D ERASE (display erase)
• PERSIST
•CURSOR
•GRID
•SCAN TIME
NOTE