Olympus BondMaster 600 - Figure I-4 Bondmaster 600

DMTA-10045-01EN, Rev. E, August 2016
Chapter 7 182
All commands end with a Carriage Return and Line Feed (entered as “\r\n”). Any
space in a Write command should be replaced with an underscore character. For
example, for FRQ NEG, use FRQ_NEG.
Table 7 BondMaster 600 remote commands
Command Description R/W/X
Range / valid strings
Min. Max.
ADW
Alarm Dwell R/W 0.000 10.000
ANG
Angle 1 R/W 0.000 359.900
ANI
Angle Step
Increment
R 0.100 N/A
ASE Sweep Erase R/W ON/OFF
AST Auto Sweep Time R/W 0.005 10.000
AUE Auto Erase After
Null
R/W ON/OFF
ALC Alarm Condition R ON/OFF
ALMXY1 Alarm Type 1 R/W OFF/FRQ_NEG/FRQ_POS
ALMXY1SHAPE Alarm Shape 1 R/W BOX/SECTOR/CIRCLE
ALMXY1BTOP Alarm 1 Box Top R/W 0.0 100.0
ALMXY1BBOT Alarm 1 Box
Bottom
R/W 0.0 100.0
ALMXY1BLEFT Alarm 1 Box Left R/W 0.0 100.0
ALMXY1BRIGHT Alarm 1 Box
Right
R/W 0.0 100.0
ALMXY1SIDIA Alarm 1 Sector
Inner Diameter
R/W 7.0 263.0
NOTE