Olympus BondMaster 600 - PC RF Mode - DISP;DOTS Menu

DMTA-10045-01EN, Rev. E, August 2016
Chapter 5 84
Changing the Parameters in the RESON (Resonance) Mode MAIN Menu
For parameter adjustment details, see “MIA Mode — MAIN Menu” on page 81.
Parameter descriptions are based on the presumption that the BondMaster 600 is set
to RESON mode and the MAIN menu key ( ) has been pressed.
5.3.5 PC RF Mode — DISP/DOTS Menu
The DISP/DOTS (display/dots) menu allows you to change display options on the
BondMaster 600 display.
The following parameters can be adjusted on the PC RF mode DISP/DOTS menu:
•RUN
•CURSOR
•GRID
• POSITION
•H POS
•V POS
• STORE NEXT
•RE‑WRITE DOT
• ERASE DOT
• ERASE ALL
•SET REF
•D ERASE
• PERSIST
•SCAN TIME
NOTE