Olympus BondMaster 600 - Modes and Menus; Figure 5-3 the RF DISPLAY; PC RF Mode - MAIN Menu

DMTA-10045-01EN, Rev. E, August 2016
Control Functions 73
5.3 Modes and Menus
The BondMaster 600 menus described in this section are opened by pressing the
corresponding menu keys, which are described in “Menu Keys” on page 71.
The BondMaster 600 menus vary, depending on the following:
• The mode of operation; and,
• The RUN function, or display mode.
Therefore, the two master controls, MODE and RUN, determine what is displayed on
the menus.
5.3.1 PC RF Mode — MAIN Menu
The pitch-catch (PC) mode RF DISPLAY is similar to that of the impulse mode.
However, the data displayed is the raw amplified signal from the probe, and this data
is not processed by the instrument (see Figure 5-3 on page 73).
Figure 5‑3 The RF DISPLAY
NOTE