DMTA-10045-01EN, Rev. E, August 2016
Control Functions
109
STORE
Use STORE to overwrite an existing file with the current settings and data.
To overwrite a file, select it with the knob, press the MEM menu key ( ) twice
(until the GENERAL page is displayed), and then press the A key and follow the
instructions that appear on the screen.
5.3.16 Memory Text Editor
The memory text editor appears on the BondMaster 600 screen when editing the file
name or file text fields. This section of the manual provides instructions on how to use
this editor to change file names and file notes.
The following procedure is applicable when the MEM menu key ( ) has already
been pressed, and that the FILE MANAGER menu is displayed (see Figure 5-23 on
page 110).
To use the memory text editor
1. Rotate the knob to highlight the file to be edited.
2. Press the FULL NEXT key ( ) to navigate to the desired item to be edited: FILE
NAME or FILE NOTE.
3. Press the C key.
The memory text editor is activated on the BondMaster 600 display (see
Figure 5-23 on page 110).
To Next Page
Loading...
